INTERNET OF THINGS LABORATORY
| Name of the Lab | Internet of Things Laboratory |
|---|---|
| Year of Establishment | 2019 |
| Venue | Cambridge Block |
| Room No. | 2233 |
| Area | 83.64 Sq.m |
| Faculty In-charge | Dr. A. Shenbagarajan, Associate Professor/CSE |
Industrial oriented Internet of things laboratory was setup in association with Riyasaa labs to enhance and enrich the students’ knowledge to meet industry needs. IoT improves the education system and brings lot of added value to the teaching environment and student learning. The objective of this centre for IIoT is to impart knowledge in Internet of Things to all our students and to train them with the requirement of the nation to become technocrats as well as entrepreneurs in IoT technology. Periodically, renowned experts from industry and academia will be invited to present on emerging trends in IoT. This lab was set up worth of 7.5 Lakhs.
Salient Features of the Lab:
- Students gain valuable and marketable hands on learning experience with IoT Technologies and applications.
- Students can have opportunity to create new and innovative applications.
- Students can have opportunity to interact with industry experts to sharpen the knowledge.
- Students gain valuable research work with leading IoT hardware and software development tools, protocols & framework for different research problems
Click Here for Additional Details
LAB EQUIPMENTS
|
S. No. |
Name of Equipment |
Quantity |
|
1 |
Computer System |
16 |
|
2 |
Cisco sg300 Switch |
1 |
|
3 |
Canon Printer |
1 |
|
4 |
LCD Projector |
1 |
|
5 |
Raspberry Pi 4 model B 2GB RAM |
7 |
|
6 |
5v 2.4A DC Power Adapter for Rpi with USB-C cable |
7 |
|
7 |
16 GB San Disk Class 10 Micro SD Card Loaded with Raspbian OS |
7 |
|
8 |
Micro HDMI to VGA Cable |
7 |
|
9 |
Arduino Uno (DIP) – Modified |
15 |
|
10 |
Arduino Top Board |
15 |
|
11 |
USB to Serial Converter FT232RL based |
15 |
|
12 |
Multi Voltage power supply 12V, 5V, 3,3V / 1A with multi-connector options. |
15 |
|
13 |
Node MCU- ESP8266 |
15 |
|
14 |
Node MCU Base board |
15 |
|
15 |
SD card interface module |
15 |
|
16 |
BlueTooth HC-05 module |
15 |
|
17 |
DS1307 based RTC module |
15 |
|
18 |
LCD (16*2) with base board |
15 |
|
19 |
L293D bas motor interface board |
15 |
|
20 |
Water Level Sensor (Reed Switch based) |
15 |
|
21 |
Reed Switch for Door Status sensing with base board (For items 14 to 26 Refer photo4 attached) |
15 |
|
22 |
Hall Effect Sensor with base board |
15 |
|
23 |
IR based obstacle sensor with base board (Refer photo6 attached) |
15 |
|
24 |
Slot Sensor with base board |
15 |
|
25 |
Light Sensor (LDR based) with base board (Refer photo6 attached) |
15 |
|
26 |
Sound Sensor with base board |
15 |
|
27 |
PIR based motion sensor with base board (Refer photo6 attached) |
15 |
|
28 |
Temperature Sensor LM 35 with base board (Refer photo6 attached) |
15 |
|
29 |
Gas Sensor MQ2 with base board (Smoke / LPG) (Refer photo6 attached) |
15 |
|
30 |
LED with base board |
15 |
|
31 |
Bi-Color LED with base board |
15 |
|
32 |
Tri-Color LED with base board |
15 |
|
33 |
Buzzer with base board |
15 |
|
34 |
Moisture Sensor with base board |
15 |
|
35 |
Temperature and Humidity Sensor DHT 11 based with base board |
15 |
|
36 |
5V Relay modulle with base board |
15 |
|
37 |
Current Transformer with base board |
15 |
|
38 |
6V DC Motor 90 / 120 RPM |
15 |
|
39 |
USB Type A to Mini USB cable |
15 |
|
40 |
USB Type A to Micro USB cable |
15 |
|
41 |
2 pin end to end RMC cable |
45 |
|
42 |
3 pin end to end RMC cable |
60 |
|
43 |
6 pin end to end RMC cable |
30 |
|
44 |
8 pin end to end RMC cable |
15 |
|
45 |
Single pin male to male end cable |
100 |
|
46 |
Single pin male to female end cable |
100 |
|
47 |
Single pin female to female end cable |
100 |
|
48 |
GSM /GPRS Modem |
5 |
|
49 |
GPS Module |
5 |
|
50 |
Enclosures / Containers for Arduino, Node MCU, Sensor modules |
15 |
|
51 |
Other sensor modules and interface unkts like weighbridge (upto205KG)with HX711, Color sensing, Heart Beat, Blood Pressure and so on |
1 |
|
Software Details |
||
|
S. No. |
Name of the Software |
License |
|
1 |
Arduino 1.8.8 |
Unlimited |
|
2 |
Raspbian Operating System |
Unlimited |
|
3 |
Python Language IDE |
Unlimited |